The reference level of one soundtrack is 105db and 115db for the LFE channel. Most people would find these levels quite high, but not hard listen to, in a correctly designed home cinema room.
A problem occurs though, when we face the challenge of keeping the noise inside the cinema room. In a residential installation, quite often we find bedrooms and other living areas to be right next on the home cinema home. Special room construction techniques allow us put together a sufficient noise barrier, in order to reduce any sound transmission to the adjacent rooms.
However, doors have always been the weakest point, in an attempt. The mass, damping and stiffness of the home cinema door will determine its resistance to your passage of any sound waves. A door’s ability lessen noise is available from its Sound transmission Class. This means, the higher inside Class the better the efficiency.
One more problem arises though; Sound waves can travel through any opening with very little claim. And to top it off, a tiny hole in a barrier would transmit nearly as much sound being a much larger emergency. This acoustic property of sound could be a significant problem in a home cinema installation, where high quality construction is required. In the area where acoustical gaskets come into play. A home cinema door, so as to be effective, the seals around the head, jamb and sill must be complete and air-tight.
In other words, the grade of of the acoustical gasket in an at Home Theater Installation Hertfordshire cinema installation, would determine how close specific sound performance of the door, will arrive to the published requirements. A hi-end home cinema design should take every piece of information into consideration, to ensure a hi-end acoustical end result.